What are the maintenance methods for the screw air compressor motor?
The environment of the motor should be kept dry frequently, the surface should be kept clean, and the air inlet should not accumulate dust, fibers and other debris. When the thermal protection and short-circuit protection of the motor continuously occur, check whether the fault is from the motor or overload, or because the protection device is set too low, and the fault can be cleared before it can be put into operation.
When the motor bearing is running for 1500~2000h, the grease should be added. The bearing temperature should not exceed 120°C. When the temperature is lower than 70°C, the interval of adding grease can be extended. When filling the oil, use the grease gun. First remove the grease from the drain pipe and add new grease until the original grease is drained from the drain hole. Wipe it with a rag. After the oil is filled, tighten the oil plug.




