Screw air compressor six major wearing parts.
Screw air compressor six major wearing parts: air filter, oil filter, oil core, lubricant, belt, solenoid valve; do you know this knowledge?
First, the air filter
The Aircompressor filter consists of an air filter assembly and a filter element. The external connection is connected to the air intake valve of the air compressor through a joint and a threaded pipe to filter impurities such as dust and particles entering the air. Different air compressor models can choose the air filter to be installed according to the amount of air intake.
Fault appearance: filter blocked
The blocked air filter will cause the energy consumption of the air compressor to be lost, wasted electricity, and easily penetrated by dust. Excessive dust entering the inside of the air compressor will affect the life of the air compressor oil and cause the oil separator to become clogged.
Troubleshooting:
1. The filter element is the core component of the filter. It is made of special materials and belongs to the wearing parts. It requires special maintenance and maintenance. 2. When the filter has been working for a long time, the filter element has intercepted certain impurities, which will cause the pressure to increase and the flow rate to decrease. At this time, it is necessary to clean it in time. 3. When cleaning, be sure to not deform or damage the filter element.
The filter paper in the equipment is also one of the key points. The filter paper in the high-quality filter equipment is usually made of microfiber paper filled with synthetic resin, which can effectively filter impurities and has strong dirt storage capacity. The equipment also has great requirements on the strength of the filter paper. Due to the large air flow rate, the strength of the filter paper can resist the strong air flow, ensure the efficiency of filtration, and prolong the service life of the equipment.
The fineness of the filter paper is about 10um. Usually, the dust on the surface should be removed every 1000 hours. The method of cleaning is to use low-pressure air to blow the dust from the inside to the outside. A differential pressure detector is installed on the air filter. If the air filter is clogged on the display panel, the air filter must be cleaned or replaced.
