How to maintain the Screw air compressor chassis
The regular maintenance of the screw air compressor not only ensures the normal operation of the machine, but also prolongs the service life of the machine.
Many manufacturers and users in the maintenance of air compressor, screw compressor, often ignore the case of maintenance and repair, the screw compressor in the screw compressor chassis maintenance is very important, the following for you on the air compressor, screw compressor chassis maintenance method:
1. First, stop the engine first and leave the air compressor in a stopped condition before it can be checked before it is completely cooled and completely released;
2 and then open the case to check whether the balance iron pin is firm;
3. Check the bolts to see if they are loose;
4. Inspect the surface finish of the internal parts and check for wear and lack of meat;
5, the rotating parts with flashlight light, to see whether the gap is uniform, whether there is wear and tear; and then inside and outside the case shell overhaul, to see if there are cracks, if necessary, need to carry out flaw detection.
6. You need to use a wrench to lever the link between the balance iron to see if the parts are loose or eccentric;
The six step is to screw air compressor chassis maintenance method, screw air compressor maintenance is very important, in the maintenance of the screw compressor at the same time, don't forget to carry out maintenance on the screw compressor case!
----http://www.hqcompressor.com
