Nov 19, 2016 Leave a message

What Screw Compressor Installation Site Requirements

1, screw compressors installation, select broad lighting-good place to facilitate the operation and maintenance;
2, air relative humidity should be low, less dust, clean air and good ventilation, away from inflammable and explosive, corrosive chemicals and harmful unsafe goods, avoid places near the dissemination of dust;
3, air compressor installation, the ambient temperature of the installation site should be higher than 5 degrees in winter, should be below 40 degrees in summer, because the higher the ambient temperature, air compressor discharge temperature is high, it will affect the performance of the compressor, if necessary, the installation site should set the ventilation or cooling devices;
4, if the poor factory conditions, dust, require the installation of front filter equipment;
5, air-compressor installation place for the compressor unit should be single-row arrangement;
6, reserved access conditions can be installed overhead crane, so that maintenance air compressor equipment;
7, reservation maintenance space, between the compressor and the wall at least 70 cm above the distance;
8, the distance from the space at the top of the air compressor at least one meter or more.

Send Inquiry

whatsapp

skype

E-mail

Inquiry