Use of the air compressor tank
The gas storage tank is a pressure vessel for compressed gas, so be sure to pay attention to the following points when using it.
1, use the elbow as little as possible to avoid reducing the pressure.
2, the interface must be low in and out, and the end connected to the air compressor must be a low one, the purpose is to reduce the water content in the gas.
3. Check that all protective devices and safety accessories are in good condition before driving. Check whether the lubricating oil surface of each place meets the standard and does not meet the requirements.
4. Internal and external inspection of gas storage tanks and conduit joints once a year, all periodic inspections and hydraulic strength tests are conducted every three years, and detailed records must be made. Gas storage tanks that have not been qualified shall not be used.
5. When inspecting and repairing, care should be taken to prevent wood chips, iron filings, wipes, etc. from falling into cylinders, gas storage tanks and ducts.
6. No repair work shall be carried out while the machine is in operation or when the equipment is under pressure.
7. The pressure gauge should be verified, sealed and kept in good condition every year. If the pointer is not returned to the zero position during use, the dial scale is unclear or broken, etc., it should be replaced immediately. If abnormal sound, odor, vibration or malfunction occurs during operation during operation, stop immediately and use it after inspection.
