Use Of Screw Machine Parts Tips

First, the air filter, has it, inhaling the air of dust blocked the filter, thus avoiding screw air compressor was premature wear and oil separator is blocked, generally operating for 1000 hours or after one year, it is necessary to replace the filter, in dusty areas, the replacement interval is shortened. Must be shut down for maintenance and repair of filters, and to reduce the stopping time, we recommend that you change to a new or clean spare filter cartridge.
Secondly is the air compressor pressure adjustment, the differential pressure value with the bottom knob to adjust, Rotate clockwise, increase the differential pressure value, counterclockwise, air compressor pressure value. Recommended minimum pressure difference is 0.06MPa, adjusting range 0.06~0.25MPa. Air compressor pressure regulator adjustment, unloading pressure above the adjusting screw to adjust, turn the bolt clockwise, unloading pressure increase, counterclockwise unloading pressure is reduced.
Then the cooler, cooling tubes, outer surface must pay special attention to keep clean, or you will reduce the cooling effect, it should be based on working conditions, regular cleaning.