May 16, 2018 Leave a message

Twin Screw Air Compressor Five Oil Change Tips

Twin Screw Air Compressor Five Oil Change Tips


With more and more applications of air compressors and increasing frequency of use, the maintenance problems of twin-screw air compressors and screw air compressors are becoming more and more important. However, there are some misunderstandings in the course of maintenance, such as the replacement of oils. Simple is complex, and failure to deal with it will cause some failures, leading to more serious consequences.


First, we need to replace the oil if the air compressor sludge is not much, you can load half of the new oil, after 15 minutes to 1 hour to release the net, and then filled with new oil to resume normal operation. If the sludge contains too much carbon, you can manually remove the sludge and carbon deposits after disassembling the compressor cylinder, and then use a special cleaning agent to clean it. After cleaning, you must dry the moisture and then add the cleaning oil to clean it. After 100 to 200 hours, clean the oil and add new oil to resume normal operation. Failure to do so may degrade the performance of oil additives and may also lead to safety incidents.

Send Inquiry

whatsapp

skype

E-mail

Inquiry