How to arrange the screw air compressor reasonably?
1. From a safety point of view, the air compressor should be installed with open flame and non-explosion-proof equipment as much as possible to maintain a certain safety distance. Can consult professional installation technicians, refer to relevant national standards. 2. From the point of view of use, when installing the air compressor, since the air compressor is located near the air end equipment, do not be too far apart, so as to avoid the long pipeline transportation consumption of compressed air, which does not achieve the expected use effect. 3. If the ambient temperature of the screw air compressor is suitable, it will not be too high or too low. Therefore, it is considered to install the screw air compressor in the open air or semi-open area to facilitate the heat dissipation of the screw air compressor. However, if the ambient temperature changes too much, or there is often dust, the screw air compressor should be placed in a spacious room. At the same time, it also provides convenient conditions for future maintenance. 4. The bottom of the air compressor should not be equipped with liquid equipment as much as possible to avoid the influence of air compressor heat dissipation on liquid quality or liquid leakage on the operation of the air compressor.
5. The most important point in the installation of the screw air compressor is that it must be operated by professional technicians. Pay attention to the installation sequence of the screw air compressor and other post-processing equipment. The design and installation should follow the requirements for the installation and use of the screw air compressor. Standards, in order to achieve the best use, reduce unnecessary losses.
