Fifteen elements teach you how to choose the right air compressor lubricant
1
Air compressor lubricating base oil quality
The base oil of compressor oil generally accounts for more than 95% of the refined oil. Therefore, the quality of the base oil is directly related to the quality level of the compressor oil, and the quality of the base oil is directly related to the depth of refining. The deep refined base oil has low heavy aromatics, low gel content, low residual carbon and good anti-oxidant sensitivity. It has a low carbon deposition tendency in the compressor system and good oil-water separation. The base oil has a great influence on the performance of the rotary compressor oil. Therefore, the screw type air compressor oil generally uses high-quality hydrogenated mineral oil or synthetic oil as the base oil.
2
Oxidation stability of screw air compressor lubricating oil
When the oil is in circulation, it is continuously in contact with high temperature and high pressure oxygen in compressed air, and it is easy to be oxidized and degenerated to form various acids, colloids, asphaltenes, etc., so that the color of the oil becomes darker, the acid value increases, and the viscosity The deposits are increased and deposited, thereby reducing the amount of oil injected, causing the temperature of the oil and the machine to rise, resulting in excessive wear. Therefore, the screw air compressor oil must have excellent oxidation stability to ensure long-term safe use of the oil.
3
Coking tendency of screw air compressor lubricating oil
Compressor oil resistance to carbon deposition is critical to the reliable operation of compressor oil. The main substances that easily form carbon residue in oils are asphaltenes, colloids and polycyclic aromatic hydrocarbons. Most of the above materials can be removed after deep purification of the lubricating oil. Generally, low-viscosity and deep-refined lubricating oils have low residual carbon values and are not easy to deposit carbon during use. The tendency of carbon deposits of oil products is a comprehensive performance of various indicators, and there are many influencing factors. Among them, additives should also use ashless additives.
4
Oil-water separation of screw air compressor oil
During the operation, the compressor continuously meets the condensed water in the air and is stirred vigorously, which is easy to produce emulsification, resulting in unclear oil and gas separation and increased fuel consumption. The oil film is destroyed due to emulsification of the oil, causing wear. Emulsified oil promotes the dispersion of dust, grit and sludge, affecting the function of the valve and increasing friction, wear and oxidation. Therefore, high quality compressor oils have good anti-emulsification properties and oil-water separation properties.
5
Defoaming performance of screw air compressor lubricating oil
In the process of recycling, the screw compressor oil has a high circulation speed, and the oil is in a state of vigorous stirring, which is easy to generate foam. When the compressor oil is started or depressurized, the oil in the oil pool is also easy to foam. A large amount of oil foam is poured into the oil separator, which increases the resistance and increases the fuel consumption, which may cause abnormal phenomena such as severe overload and over-temperature. Therefore, an excellent rotary compressor oil must have excellent defoaming performance, and it is good in foaming tendency (i.e., foaming property) and foam stability (i.e., defoaming property) of the oil.
6
Rust prevention and corrosion resistance of screw air compressor lubricating oil
The oil cooling components of the compressor are made of copper or copper metal, which is easily corroded, causing early oxidation and deterioration of the oil to form sludge. This requires the oil to have good corrosion resistance. The moisture in the air is easily cooled in the intermittently operated compressor, which is unfavorable for lubrication and can cause rust, so the compressor oil is required to have a good anti-corrosion effect.
7
The base oil fraction of the screw air compressor lubricant is narrow
The base oil composition is a key factor in judging the quality of the air compressor oil. After the compressor oil synthesized by light and heavy is injected into the cylinder of the compressor, its light components leave the working part ahead of time due to strong volatility, which affects the lubrication effect, while the heavy components are poor in volatility. Still staying at the working part, over time, it is easy to generate carbon deposit under the action of heat and oxygen, which affects the performance of the air compressor. Therefore, the lubricating oil should be a component oil of a narrow fraction, and a component oil in which a plurality of fractions are mixed should not be used.
8
The viscosity of the screw air compressor lubricant should be suitable
Under dynamic lubrication conditions, the thickness of the oil film increases as the viscosity of the base oil increases, but the frictional force increases as the viscosity of the base oil increases. Lubricating oils with too low viscosity are not easy to form a sufficiently strong oil film, which will accelerate the wear of the air compressor, resulting in a shortened service life of short moving parts of air compression. On the contrary, the air compressor oil with too high viscosity will increase the internal friction force, increase the power loss of the compressor, and increase the fuel consumption (energy consumption) of the air compressor. It will also be in the piston ring, air valve and exhaust. Deposits are formed at channels and the like.
Therefore, the selection of air compressor oil of appropriate viscosity is also a serious consideration. Scientific verification has shown that the same test conditions are used on the same type of compressor. The use of lower viscosity oils can reduce the loss power of the compressor by up to 10% compared to the use of high viscosity oils, and there is no significant difference in component wear. . Therefore, under the premise of ensuring lubrication, selecting oils with suitable viscosity grades has an important influence on the energy saving of air compressors and the reliable operation of air compressors.
9
The flash point of the screw air compressor lubricant should be suitable
The flash point is the temperature at which the vapor pressure of the oil is heated under atmospheric pressure to the lower limit concentration ignited by an open flame. The air compressor oil with too high flash point has a heavy oil fraction and a high viscosity, and the content of impurities such as asphalt is high, and it is easy to form carbon deposits during use. If only the high flash point of the compressor oil is pursued, it will become an unsafe factor for the air compressor. Therefore, the flash point of the compressor oil is required to be moderate, and it is generally controlled above 200 °C.
10
Screw air compressor lubricant does not corrode metal and has good rust resistance
The oil cooling components of the compressor are made of copper or copper metal, which is easily corroded, which causes early oxidation and deterioration of the oil to form sludge. This requires the oil to have good corrosion resistance. The moisture in the air is easily cooled in the cylinders of the intermittently operated compressor, which is unfavorable for lubrication and can cause wear and rust. The compressor oil is required to have a good anti-corrosion effect.
11
Consider the working load of the screw air compressor
The working load is the load of the bearing (or the friction pair) directly bearing the static load and the dynamic load. It should be considered comprehensively when selecting the lubricating oil. Under liquid lubrication conditions, the greater the viscosity of the lubricating oil, the greater its load carrying capacity; when it is in the boundary lubrication condition, the viscosity has little effect on improving lubrication, and its oil resistance and extreme pressure resistance are indispensable. For lubricating oils with good pressure performance; for impact load, reciprocating motion or oil film formation, grease or solid lubricant should be used. Centrifugal compressor bearings are generally radial bearings.
12
Consider the speed of the screw air compressor
The relative movement speed is an important parameter for the structural design of the bearing (or friction pair), and it is also a consideration for the selection of the lubricating oil. Generally, the bearing with a low relative movement speed is suitable for the lubricating oil with a larger viscosity to facilitate the formation and maintenance of the oil film; Compressors generally have a higher rotational speed, some of which are above 10,000 r/min, so it is advisable to use a lubricant with a lower viscosity.
13
Consider the operating temperature of the screw air compressor
Working temperature refers to the ambient temperature at which the bearing is working, and the temperature affecting it. If the ambient temperature is low, the lubricating oil with low viscosity and low freezing point should be used; when the ambient temperature is high, then Lubricating oils with high viscosity and high flash point should be selected; when the working environment temperature of the bearing changes greatly, lubricating oil with good viscosity-temperature performance and high viscosity index should also be used. In short, when selecting lubricants, it is necessary to make the collocation reasonable and reliable according to the working environment temperature of the bearing.
14
Consider the screw air compressor lubrication method
For the lubrication of the gap type lubrication or the easy loss of the lubricating oil, the lubricating oil with good adhesion and high viscosity should be selected; the centrifugal compressor generally adopts continuous and forced lubrication, so the relative viscosity is small, the oxidation stability is good, and the anti-oxidation stability is good. Rust, anti-foam and lubricants with good lubricity.
15
Consider the operating environment of the screw air compressor
If the compression medium of the compressor has special requirements for the lubricating oil, the corresponding air compressor lubricating oil with resistance to the medium, such as ammonia lubricating oil for ammonia compressor, should also be selected. In addition, when selecting oil, you should also refer to the lubricant recommended by the equipment manufacturer. In summary, when selecting lubricants, one must consider the working and environmental conditions of the equipment to meet the needs of equipment operation; the second is to minimize the variety of lubricants to facilitate the management of lubricants.




