Feb 19, 2019 Leave a message

Energy Saving Problem Of Belt Conveyor In Coal Mine Production

Belt conveyors have been widely used as the main equipment for coal mine transportation. With the development of high-yield and high-efficiency working faces in coal mines, long-distance, large-capacity and high-speed belt conveyors are being designed, manufactured and put into operation. The use of these large-scale models makes the impact load of the conveyor large, the uneven output of the drive motor and the motor overload are more acutely exposed. The starting and running mode of the belt conveyor is that the winding motor is stepped down after the rotor winding is started, and then the power frequency is operated, and the fluid coupling is switched to the belt conveyor. The working principle of the belt conveyor is that the belt conveyor drives the wheel hub to pull the belt by friction, and the belt moves the animal body on the supporting roller by tension deformation and friction. The belt is an elastic energy storage material, which stores a large amount of potential energy when the belt conveyor is stopped and running, which determines that the belt conveyor should be soft-started when it starts.


2. Application of frequency conversion speed regulation technology in belt conveyor


The variable frequency speed control automatic control system in the belt conveyor consists of programmable controller PLC, frequency converter, current transformer, current transmitter, nuclear belt scale, belt speed sensor and motor speed sensor, which can be summarized as The detection unit, the control unit and the execution unit are three parts.


Detection unit: The current transformer and the transmitter obtain the motor current signal. The speed signal collected by the speed sensor is converted into a voltage signal. The speed signal collected by the motor speed sensor is converted into a voltage signal. Nuclear belt scales collect traffic signals. Each signal is sent to the core module.


Control unit: When the PLC receives the detection signal, it determines the start, power balance and energy-saving speed adjustment function of the belt conveyor. At the same time, the main control unit also has fault protection functions such as broken belt, coal pile, tear strip, smoke, slip, temperature and so on.


Send Inquiry

whatsapp

skype

E-mail

Inquiry