The atmosphere contains corrosive gases, water vapor, hydrocarbons and other impurities. There are about 140 million solid particles per cubic meter of air. More than 80% of these impurities are less than 2μm in diameter, so It is easy to enter the compressed air system through air compressors and filters.
After passing through a simple filter, the air containing various impurities enters the air compressor for compression. Due to the high temperature and oxidation generated during the compression of the gas, the quality of the compressor lubricating oil is lowered and it is strongly acidic. When these solid particles enter the compressed air pipe network system together with the oil and water vapor in the compressed air, if the traditional galvanized pipe or carbon steel pipe is used, the inner wall of the pipe will be first rusted because of its active iron. Chemical properties are particularly prone to rust, and iron in contact with air chemically reacts with oxygen in the air, turning the molecules on the iron surface into iron oxide, rust. The surface of the iron exposed to the air is oxidized and rusted, making the iron soft and loose.




