Apr 03, 2019 Leave a message

Mobile air compressor operating specifications

  1. Test and inspection of small mobile air compressor


1.1 Check whether the parts are good and the joints are loose. If there is any abnormality, it should be repaired immediately.


1.2 Check that the protective cover of the transmission part should be complete and complete to avoid personal accidents.


1.3 Meters with air pressure, temperature, current, etc. should be in good condition and qualified, and marked with a certificate.


1.4 Check whether the air compressor air tank is regularly subjected to pressure test according to the regulations. The validity period of the certificate label shall be within the validity period.


1.5 The metal casing of the air compressor should have a reliable protective grounding.


1.6 The gas storage tank safety valve (pressure relief valve) should be clean and free of grease, and the test action pressure is within the specified range.


1.7 Check that the connected power supply voltage meets the nameplate voltage requirements.


2. Precautions for use and maintenance of small mobile air compressors


2.1 Air compressor operators must understand the mechanical construction, performance and use, and be familiar with the operation and maintenance methods of the machinery being operated.


2.2 After the mobile air compressor is placed in a flat position, the wheel should be plugged with a triangular wood or braked with a brake.


2.3 The gas pipeline should avoid sharp bends. Before opening the air supply master valve, the staff at the gas location should be notified.


2.4 Immediately stop the maintenance when one of the following conditions occurs during use:


2.4.1 The indicated values of the pressure, temperature, current and other meters suddenly exceed the specified range or the indication is abnormal;


2.4.2 When gas leakage, oil leakage, leakage, etc. occur;


2.4.3 The safety valve is continuously deflated or the mechanical noise is abnormal and cannot be adjusted;


2.5 When performing maintenance work, it is forbidden to use gasoline or kerosene to wash the crankshaft, filter or other parts of the compressed air passage of the compressor to avoid explosion.


2.6 When stopping work, reduce the load and stop again.


2.7 If you need to move the position during use, you should cut off the power switch.


Send Inquiry

whatsapp

skype

E-mail

Inquiry