Is the color of air compressor oil related to quality?
The air compressor is based on the setting of the oil mirror, which is convenient for understanding the remaining amount and color of the lubricating oil. Then, can we judge whether the equipment is faulty from the color of the lubricating oil? If it is the same lubricating oil, according to the trend of the time scale, it is possible to analyze and judge the change of the quality of the lubricating oil. Because the change in color means that its chemical composition has changed or has been contaminated. If it is not the same type of oil, it is not possible to judge the quality of the oil based solely on the color. The color of the lubricating oil is related to its main raw material, and its color does not directly correspond to the quality of the oil.
Base oil
The base oil is different depending on the processing depth and the color is different. Class I oils are mostly yellowish, but the II and III base oils refined by hydrogenation and the synthetic oils prepared by chemical methods, such as PAO, ester oils, polyethers, etc., will contain less aromatic hydrocarbons. When they are impurities, their color will be relatively light, and they will be as bright as water!
additive
Among the additives, there are viscosity index improvers, extreme pressure anti-wear agents, antioxidants, anti-foaming agents, rust inhibitors, anti-emulsifiers and the like. All of these additives have their own different colors. When the additive is blended with the base oil, the color of the lubricant will vary, deeper (eg brown), or lighter.
Dyeing agent
The effect of the coloring agent is sometimes to add a specific coloring agent to some lubricating oils and greases to change their original color. The purpose of doing this is sometimes to serve as a warning to distinguish other lubricants. In fact, it is more of a marketing factor, such as Ingersoll Rand is reddish, Shouli is green, Atlas is translucent, CompAir It is blue, the yates is red, etc. Sometimes it is just to distinguish different product lines, the dye will not get any lubrication protection.
In the process of using air compressor oil, the oil will change color, from shallow to deep, which is a common phenomenon. Some users directly confuse the color of the oil with the quality of the oil and immediately change the oil. This is unscientific. When the air compressor oil needs to be replaced, in addition to judging from the appearance, it is necessary to judge from the change of the comprehensive index of viscosity, acid value, insoluble content, etc., or roughly based on the experience of the field service personnel, from the consistency, smell, appearance Initially, it is sometimes good to look outside the oil, but it has been severely gelled and aged. If it is judged only from the appearance, it will easily cause waste of resources or neglect the real risk.




