Influence of air humidity on air compressor
It is not conducive to the compression of the machine, so that the compression equipment and the pneumatic machinery suffer from hydraulic impact. If the cooler and the cylinder store a large amount of water, it will also cause damage to the machine.
It is known to all that air can be compressed, but water cannot be compressed. There is too much water in the air.
The water in the air is highly corrosive, which makes the compression equipment and pneumatic machinery easy to rust and shorten the service life.
Water in the air Narrows the compressed air passage and increases resistance to air flow
A cubic meter of wet air, or the density of air molecules, is less than the weight of dry air of the same volume.At the same time, much of the water vapor condenses when compressed air passes through the cooler's gas tanks and pipelines, reducing the capacity to calculate weight
When water in the gas is mixed with lubricating oil in the compression process, it will reduce the lubrication efficiency and increase the abrasion of the machine parts. In the glue used for circulating lubrication filler, it will not only result in poor sealing but also deteriorate the lubricating oil
The air supply system contains water. When the temperature is below 0 degrees, water will freeze on the inner wall of the air duct. Likewise, the pipe diameter will be reduced.Therefore, the quality of compressed air depends not only on its pressure, but also on its humidity
