Jun 27, 2019 Leave a message

How to judge the quality of screw air compressor lubricant?

How to judge the quality of screw air compressor lubricant?


1. Observation method


It is judged whether the lubricating oil has deteriorated according to the flow state. Place the lubricating oil in a container and slowly pour it. While pouring, observe the flow of the screw air compressor lubricant. If the flow state of the lubricating oil is uniform, slender, and continuous, it indicates that the oil quality is good; if the flow rate is suddenly slow and fast, the flow rate is too low or too little, indicating that the lubricating oil has deteriorated.


Observe the initial color of the lubricant. The quality of the high-quality lubricant is very light. After a period of time, the color will gradually deepen or become turbid. This indicates that the lubricant has deteriorated. It is not recommended to use it.


2, touch method


When the lubricant deteriorates, the touch is different. High-quality lubricating oil, the hand rubbing will obviously feel strong lubrication, and there is no obvious friction feeling; if the friction feeling is obviously felt during the grinding process, it means that the lubricating oil contains impurities, then it is recommended to replace the new one. Oil products.


3, detection method


It is recommended to regularly sample the lubricant to check whether the indicators of the lubricant are qualified. According to the test report, it is necessary to replace the new oil.


The screw air compressor has strict requirements on the lubricating oil. Only the correct selection of high-quality lubricating oil can effectively reduce the wear degree of the screw air compressor and prolong the service life of the air compressor.


Send Inquiry

whatsapp

skype

E-mail

Inquiry