How to install and replace air compressor bearings operating requirements.
(1) the resultant force should be applied as far as possible through the axis of the bearing, which requires the application point to be uniformly symmetric and stable, and to apply the force through the sphere or parallel to the axis.
(2) the size of the applied force should be stable and even, and there should be no impact. Therefore, oil pressure or tools that can apply stable tension or pressure should be adopted.It is best to hammer with a copper rod or hammer.
(3) avoid applying force through the rolling body, which requires applying force through the inner ring when mounting and removing the inner ring (shaft ring) and the outer ring when installing and removing the outer ring).
(4) the drag force should be maintained to the appropriate extent. For example, when installing the IKO imported bearing, stop applying force when the bearing is just installed in the correct position, and ensure that the end face of the sleeve (washer) is pressed against the end face of the housing hole or shaft, which cannot be squeezed too tightly or installed in place.
