Nov 07, 2018 Leave a message

Comparison of air compressor direct connection and belt connection

Comparison of air compressor direct connection and belt connection


(1) Efficiency. The excellent direct transmission transmission efficiency can reach 98%~99%, and the excellent belt transmission design can reach 99% efficiency under normal working conditions.

(2) No-load energy consumption.

1) For direct-coupled direct drive, the no-load pressure is generally maintained above 2.5 bar, a little even up to 4 bar to ensure lubrication of the shifting gearbox.

2) For the belt drive mode, the theoretical no-load pressure can be zero because the oil sucked in by the rotor is sufficient to lubricate the bearings of the rotor. Generally for safety reasons, the pressure is maintained at around 0.5 bar.

3) For the direct-coupled direct drive mode, the first damage to the oil-loss condition will be the gearbox. The belt drive system does not have such safety problems at all.

4) The motor or rotor bearing is damaged. For the direct-coupled air compressor, when the motor or rotor bearing is damaged, it will cause direct and indirect damage to important components. This is not the case with belt drive air compressors.

5) The pressure of the installed air compressor changes. Sometimes the design pressure of the original purchased air compressor may be too high or too low due to changes in the user's production process conditions, and it is hoped that it will change, but for gear-driven air compressors, this work will be very difficult and expensive. . For belt-driven air compressors, it is a breeze, just replace the belt.

6) When installing new bearings, when the Huanzi bearing needs to be replaced, for the air compressor of the direct-coupled transmission, the gearbox and the gearbox spindle bearing need to be overhauled at the same time, and the cost is high. For the belt-driven air compressor, there is no such Kind of problem.


Send Inquiry

whatsapp

skype

E-mail

Inquiry