Xiamen HighQ Compressor Co., Ltd

High quality product, professional service, being the core supplier in compressor industry

Home > News > Content
Maintenance Method Of Screw-type Air Compressor Motor
- Nov 19, 2016 -

Motor environment should be kept dry, the surface should be clean, air inlet should not accumulate dust, fibers and other debris. When the motor thermal protection and short circuit protection continuous action, should check the fault from the motor is overloaded, or the protection device setting is too low, failure to clear the rear can be put into operation.
Adding grease the motor bearings should run 1500~2000h, bearing temperature does not exceed 120 ℃, when the temperature is less than 70 degrees, adding intervals of the grease can be appropriately extended. When grease using a grease gun, just oil on the exhaust pipe plug removed, join until new grease old grease from drain hole drain, clean with a rag, oil finished, tighten the oil plug.